Kitchen drain hookup

kitchen drain hookup

How do you install a kitchen sink drain?

To install a kitchen sink drain, you’ll need a drain assembly kit that fits your sink, pliers, a basket wrench, plumber’s putty, and a brass tailpiece to attach the basket strainer to the main drainpipe. You’ll need to disconnect the drain pipe and remove the existing strainer if you haven’t already.

How high should a kitchen sink drain be above the floor?

Typically, your kitchen sink drain should be about 20 inches above the floor, but this is influenced by a few key factors: You need to allow enough room so that your P-Trap is no more than 24 inches below the sink drain. You may need to raise your sink if this is an issue.

Where do you put a P trap on a kitchen sink?

Locate the drain pipe coming from the floor or wall and rough in your drainage pipe from your kitchen sink drain to the drainage pipe. Be sure to include a P-trap located as close to the drainage pipe that is coming out of the wall or floor as possible.

What are the parts of a drain assembly kit?

A drain assembly kit will contain a basket strainer, locking nut, rubber washer, friction ring, and a brass tailpiece to connect the the drain to the drainpipes. Make sure you have all of the pieces you’ll need to install your drain and make sure the drain fits into the drain hole at the bottom of your sink.

What do you need to install under a kitchen sink?

This is also a good time to install any other under-sink components, such as a water filter or a hot water dispenser. You will need to work around these fittings as you connect the drain pipes. The drain tailpiece is a short vertical length of straight pipe that joins the sink strainer to a tee fitting.

Is it easy to install a sink drain yourself?

Installing a kitchen sink drain is among the least technical aspects of plumbing. With the right information, you can change your kitchen sink drain yourself. In this DIY guide, we broke down the process of installing a sink drain into actionable steps any novice can follow and achieve a professional result.

How do you fix a leaking kitchen sink drain?

If your kitchen sink drain is corroded and leaking, installing a new basket strainer is an easy way to solve the problem. Start by adding plumber’s putty to the underside of the basket strainer and fit it into the drain hole at the bottom of the sink. Then, tighten the nut with a basket wrench to secure it in place.

What are the parts of a sink drain kit?

The components making up the sink drain kit include rubber-seal washer, a fastening nut, basket strainer, friction-protection band, and a tailpiece that connects the drainpipe and the kitchen sink drain. You should ensure that the tailpiece also matches the size of your drainpipe.

What are the parts of a kitchen sink drain?

Parts of a Kitchen Sink Drain. 1 1. Faucet. You cannot have a sink without a faucet. A faucet is connected to the sink’s hot and cold-water supply to provide you with water every time ... 2 2. Water Supply Hoses. 3 3. Water Shut Off Valves. 4 4. Kitchen Sink Strainer. 5 5. Locknut and washers. More items

What are the parts of a bathtub drain Assembly?

The main portion of the bathtub drain assembly is a pipe that runs horizontally under the bathtub. This drainpipe is called the drain shoe, which connects to the main drain body you see in the bottom of the bathtub. On the other end of the drain shoe is a pipe tee, which has three openings to connect to the parts of the drain assembly.

What are the parts of a sewer line drain?

Once water exits the drain, the tailpiece carries water away from the sink. P-Trap: Sometimes just called the ‘trap,’ the P-trap exists in two parts and can be found underneath your sink. It allows water and waste to pass through. The bend in the pipe is what traps the waste and prevent sewer gas odors from seeping into your home.

How does a kitchen drain pipe work?

Although your kitchen has a separate drainpipe, it is connected to the main house drainpipe together with other bathroom drainpipes (bathroom sink, toilets, shower and bathtub). The main house drainpipe then drains the waste out to the city’s sewer pipes or in the septic tank. This means that all of your fixture’s drainpipes are in communication.

Related posts: