Irrigation hookup

irrigation hookup

How do you hook up an irrigation system to the water?

The water for your lawn irrigation system has to come from somewhere, so you need to hook your system to the house water supply. Tapping into the water supply is one part of the installation that you should really get help on from a professional installer or plumber.

What is the point of connection for my irrigation system?

This location will be your Point of Connection (P.O.C.) for the irrigation system and you will want to install a good quality shut-off valve at the start of your irrigation mainline, for turning off the irrigation for repairs or winter.

Can you tap into a house water supply pipe for irrigation?

This page provides some specific rules, tips, and techniques for tapping into a house water supply pipe for a new irrigation system. Where and how you tap into the water supply can be critically important, not just for the proper operation of the irrigation system, but also for the preservation of your sanity!

Can I Run my irrigation system through the House?

No water running through the house! To avoid nasty surprises, avoid using a water supply (POC) for your irrigation system that passes through a house inside the walls, under floors, or through the attic. Keep reading for in-depth details and answers to “why?”

How to connect water supply for irrigation sprinkler system?

How To Connect Water Supply For Irrigation Sprinkler System 1 Simply connect the sprinkler system valves to the water supply using the existing hose faucet. This may be the... 2 Plumbing into the household Water Supply. This is the most common installation method for most medium to large... More ...

How do you install garden irrigation?

Read on to learn how to install garden irrigation. Drip or micro-irrigation is an irrigation method that applies water slowly to individual plants. Drip systems are fairly easy to set up yourself and require four easy steps: laying out the irrigation grid, assembling the hoses, installing tees, and then installing emitters and feed lines.

How do you hook up an irrigation system to a faucet?

Unscrew the outside faucet and install a 1-inch galvanized or copper tee fitting facing down. Screw the faucet back on to the tee. Below the tee, install a shutoff valve and then run pipe to the manifold and your irrigation system. This is probably the least complicated junction. Tapping the main line.

Can you tap into a house water supply pipe for irrigation?

This page provides some specific rules, tips, and techniques for tapping into a house water supply pipe for a new irrigation system. Where and how you tap into the water supply can be critically important, not just for the proper operation of the irrigation system, but also for the preservation of your sanity!

What do you need to know about irrigation systems?

Shutoff Valve – An irrigation system is like any other water appliance in your house. It’s important to make sure you have a way to shutoff the water supply. You’ll need it in the event of a water line break or of a valve that’s hung open.

How to install an irrigation system?

After you have the entire irrigation system attached to the manifold and the main water line, you’re heading down the stretch to the finish line. Attach the risers. Cut the pipe at each spot where a riser is to go and install a tee fitting. Install the riser, making sure that the sprinkler head will be at or just above soil level.

How is water pumped into an irrigation system?

– Water is pumped into the irrigation system from a static water source, i.e. lake or pond. – No additional water usage costs. – Water is supplied through an established water system, i.e. utility department. – Can be tied into a house’s existing water lines.

What are the best irrigation systems for your garden?

This lends itself well to large projects, where manual watering may be too time-consuming. Solar powered irrigation systems are the eco-friendly future of gardening and they require no water, mains or electricity supply. This makes them completely self-sufficient and perfect for your smaller greenhouses.

Related posts: