Hook up fluorescent light fixture

hook up fluorescent light fixture

How do you wire a fluorescent light switch to a light fixture?

Two wires from the switch are connected, usually with wirenuts, to four wires from the fluorescent tube. Disassemble the fixture as far as necessary to gain access to the back of the switch, then screw in the new switch and transfer wires from the old switch to the new one, one at a time to avoid an incorrect connection.

How to troubleshoot and repair fluorescent lights?

How to Troubleshoot and Repair Fluorescent Light Fixtures Step 1: Shut off power to the fixture.. Do this by turning off power at the main circuit breaker. Once you have removed... Step 2: Remove the Diffuser and Cover Plate. To access the parts of the fixture, youll need to remove the diffuser,... ...

What are the advantages of Installing fluorescent fixtures?

Installing fluorescent light fixtures is an inexpensive way to make a dark or dim space bright and cheery. These light fixtures offer great energy efficiency, low heat and a wide spread of lighting.

Why do fluorescent fixtures have more than one tube?

Many fluorescent fixtures have more than one tube in order to provide more light. These lamps must have individual starters and ballasts for each tube. The fixture may appear to have two tubes working off one ballast, but actually there are two ballasts built into one case.

How do you wire a fluorescent light fixture with wires?

Attaching a plug to a fluorescent light fixture will allow it to be used in different locations. Strip an inch of insulation from the back and white wires on the fixture and one end of the electrical cable with the electrical pliers. Attach the respective white (neutral) wires, black (hot) wires and bare (ground) wires together.

How do you hook up a light switch to a switch?

Hook the black wire on the second brass screw and tighten it. Hook the bare wire to the green screw on the other side of the switch. Find the white wire coming from the main service panel and connect it to the white wire on the cable using a wire nut. Screw the switch back to the electric box and re-attach the switch cover.

How do you insulate around a light fixture?

Strip an inch of insulation from the back and white wires on the fixture and one end of the electrical cable with the electrical pliers. Attach the respective white (neutral) wires, black (hot) wires and bare (ground) wires together. Secure with the wire nuts. Wrap with electrical tape.

How do you hook up a light fixture to the ground?

If your fixture is equipped with a green (or bare) grounding wire, connect it to the existing ground wire from the ceiling wiring and make sure the connection is tight. Attach any reflector or diffusers that came with your fixture.

What is fluorescent lighting and how does it work?

Fluorescent lighting is light produced in a glass tube with electrical current passing through it, which reacts with mercury vapor to create light. The electrified vapor produces ultraviolet light which is absorbed by a chemical coating on the inside of the tube.

What are the different sizes of fluorescent tubes?

Fluorescent Tube Sizes Guide. There are 4 different fluorescent tube sizes; T4, T5, T8, and T12. The T stands for tubular and the numbers are an index for the diameter (in inches) of the tube light. Most tube lighting will have its size mentioned on one of the end of the tube.

How do fluorescent tubes get their color?

The inside of the tube is coated with a phosphorous material that emits visible light when excited with UV and the tube gives off light. By carefully selecting the fluorescent powders (called phosphors), the manufacturer of the light can tailor the lights coloration.

What do the numbers on fluorescent tubes mean?

There are 4 different fluorescent light options; T4, T5, T8, and T12. The T stands for tubular and the numbers are an index for the diameter (in inches) of the tube. Most tube lighting will have its size mentioned on an end of the tube.

Related posts: