Aep power hookup

aep power hookup

How do I contact AEP about small generator interconnections?

Requesters seeking new or changing small generator (10 MW or less) interconnections within the ERCOT region of the AEP transmission system should contact the AEP Transmission and Interconnection Services Department. AEP System Contact Information: Director, Transmission and Interconnection Services American Electric Power Service Corp.

How do I contact AEP?

AEP System Contact Information: Director, Transmission and Interconnection Services American Electric Power Service Corp. 212 East Sixth Street Tulsa, OK 74119 Phone: 918-599-2723 email: rlpennybaker@aep.com Network Interconnection and End-User Connection Requests:

How do I serve load from an AEP transmission line?

Any plan to serve load from an AEP Transmission Line involves establishing a connection point. At the connection point, appropriate facilities are required to provide adequate service to the new customer while maintaining service reliability and quality to other customers served from the subject transmission line.

How is the requester connected to the AEP system?

If the Requester’s facilities are located near an existing AEP station, the connection from the AEP transmission system may be provided by constructing a radial line from the AEP station to the Requesters facility.

Can a generator be connected to the AEP electric system?

It is the practice of AEP to permit any qualifying generator to operate its generating equipment in parallel with the AEP electric system, provided this connection can be accomplished without adverse effects on the general public, AEP equipment or other customers.

How do I contact AEP?

AEP System Contact Information: Director, Transmission and Interconnection Services American Electric Power Service Corp. 212 East Sixth Street Tulsa, OK 74119 Phone: 918-599-2723 email: rlpennybaker@aep.com Network Interconnection and End-User Connection Requests:

How is independent energy metering installed on AEP transmission lines?

For two or more points of interconnections (for example, two or more lines) to the AEP transmission grid, independent energy metering shall be installed on each interconnection circuit. Primary and backup energy meters shall be installed in each transmission interconnection metering circuit.

What are the requirements for connection of new facilities to AEP?

Requirements for Connection of New Facilities or Changes to Existing Facilities Connected to the AEP Transmission System Rev. 2 TP-0001 Page 68 of 99 For two or more points of interconnections (for example, two or more lines) to the AEP transmission grid, independent energy metering shall be installed on each interconnection circuit.

How is the requester connected to the AEP transmission system?

If the Requesters facilities are located near an existing AEP transmission line, the connection from the AEP transmission system may be provided by tapping the nearby AEP line and constructing a radial line to the Requesters facility.

What is the requester’s responsibility to AEP?

The Requester shall install, operate and maintain in good order and repair, and without cost to AEP, all facilities that AEP requires for the safe operation of the Requester’s facilities connected to AEP’s electrical system.

What are the requirements for connection of new facilities to AEP?

Requirements for Connection of New Facilities or Changes to Existing Facilities Connected to the AEP Transmission System Rev. 2 TP-0001 Page 68 of 99 For two or more points of interconnections (for example, two or more lines) to the AEP transmission grid, independent energy metering shall be installed on each interconnection circuit.

How does AEP work with the requester on the Interconnection Agreement (IA)?

Once the interconnection request has received the required endorsements from ERCOT, AEP will work with the Requester to draft the required Interconnection Agreement (IA). 1.0.2 PJM Region Generator Connection and Network Interconnection Requests:

Related posts: