Hook up led light bar

hook up led light bar

How to connect LED light bar to power supply?

Tip: Never connect your LED light bar to AC current as it will damage it. Connect the light bar’s red wire to the positive side of the battery or power supply and the black wire to the negative terminal. If the light does not work, you need to take care of this problem before continuing with the installation.

How do you wire a light bar on a boat?

For light bar wiring, you need a pair of wire cutters, wire strippers and the correct crimpers for the connectors you choose. Use marine grade or IP-rated connectors and you can forgo tape and caulking to seal splices. Wire ties help route wiring under the hood and inside the cab. Testing the LED Light Bar

How hard is it to install an LED light bar?

As long as you follow instructions and have basic tools, you can install your new LED light bar with little difficulty. This article provides basic installation guidance to supplement the directions or schematics that came with your light bar.

How do you mount an LED light bar to a wall?

These allow flexibility with regard to positioning the mounting brackets, which slide into the housing channel. If you have a lumber rack or roll bar, specialized bar mounts and clamps may be the simplest way to get your LED light bar attached.

How to connect a light bar to a battery?

Connect the light bar’s red wire to the positive side of the battery or power supply and the black wire to the negative terminal. If the light does not work, you need to take care of this problem before continuing with the installation.

How to connect ribbon lights to power supply?

Now that your LED ribbon lights are connected, let’s see how you can connect strip lights to the power supply. There are many ways to connect your light strips to power. You can connect each strip directly to the socket, this is especially useful when lighting smaller spaces or projects. You can use LED light strip clips to make the connection.

How to connect LED strip to power supply?

An LED controller is needed to control the colors existing beneath its function. It is located mostly in between the power supply and the LED strip. To connect the strip to the power supply, the output terminals should be connected to the controller, whereas the input terminal should be attached to the main supply.

How to choose the right power supply for LED lights?

Make sure to have a large enough power supply by giving yourself a 20% cushion over the total wattage you calculate from your LEDs. This can easily be done by multiplying your total wattage by 1.2 and then finding a power supply rated for that wattage.

Related posts: