Can i hook up 2 amps to 1 sub

can i hook up 2 amps to 1 sub

How many amps to connect to a subwoofer?

Most of the people connect two amps together; one for speakers and other for subwoofers. It gives better sound quality. Wire Multiple Amplifiers To One Source Some people also attach multiple amps to hear the louder sound.

How do I connect two amps together?

Most of the amplifiers include this functionality in internal wiring. If pass-through functionality is available you can connect two or more amps together. You can connect pass-through output on the first amp to the preamp input on second amp and up to so on.

How many amplifiers can I connect to my amp?

You can connect as many amplifiers as your head unit can support. As all the head units do not have many preamp outputs, you should check preamp pass-through functionality in your amplifier.

How do you hook up 3 subwoofers together?

Connecting Three or Four Subwoofers If you plan to use three or four subwoofers, the best option is to make sure all the subwoofers have either RCA or LFE line-out connections and daisy chain them together using a series of subwoofer cables.

How to connect a subwoofer to an amplifier?

There are a few ways that one can expect to connect a subwoofer to an amplifier, receiver, or processor (also known as a home theater receiver). The most common method is done by connecting the subwoofer to the SUB OUT or LFE output of a receiver/amplifier. But you might also come across a subwoofer that uses stereo RCA or speaker wire connections.

How much power can a subwoofer handle?

Make sure the Amp correlates with subwoofers; this means wattage and rms matches with the subwoofers so you dont blow them out. For example, my subwoofers can push 1200 watts at 600 RMS, RMS represents how much continuous power a subwoofer can handle.

Do subwoofers have speaker level inputs?

Subwoofers with speaker level inputs are great to have for exactly this reason as you can connect them directly to an older amplifier or vintage receiver’s speaker outputs. Even if you buy (or already own) a subwoofer without speaker level inputs, it’s ok – there’s another way to basically connect it essentially the same way!

What cable do I need to hook up a subwoofer?

If your subwoofer has a single RCA subwoofer input jack, you may want to pick up a “Y” RCA adapter to combine both receiver channels on the output side into a single mono RCA plug. Subwoofers with 2 (stereo) RCA jack inputs will need a standard stereo male-male RCA cable.

How do I connect two subwoofers together?

Next easiest: Use an RCA Y-Adapter to send two parallel low-frequency audio signals to two separate subwoofers. This article provides an overview of connecting multiple subwoofers in a home theater setting.

How do you hook up a subwoofer to a preamp?

If all you have is one subwoofer, its easy: feed it from the Subwoofer or LFE (low-frequency effects) output of your preamp or receiver. Set your preamp or receiver to Small for your other speakers. Avoid connecting the subwoofer with speaker wire.

Can you connect a subwoofer to a full range speaker?

Avoid connecting the subwoofer with speaker wire. The subwoofer will work well, but those speaker-wire connections on the back of the subwoofer, if it has them, do a poor job of isolating bass from your main speakers. Its OK to run your main speakers full-range and cross-in the subwoofers on their own. That was easy.

How do I Make my subwoofer sound like a bass player?

The easiest way to replace boomy, unclear bass with deep, tight bass is to set the subwoofers crossover to its lowest setting, usually 30 to 50 Hz, and then turn up the subwoofers level. Unless youre trying to design a concert PA system for maximum power handling, I set the crossover frequency for the main speakers based on actual listening.

Related posts: