Turntable hook up

turntable hook up

How to connect a turntable to powered speakers?

To connect a turntable without a built-in preamp to powered speakers, you will need to use a standalone preamp between the turntable and the speakers. You connect the RCA cable from the turntable to the input on the preamp. And the output on the preamp to the LINE input on the powered speakers.

How do I connect my turntable to my aux line?

A turntable can be connected to an AUX or LINE input if it has a built-in preamp (outputs a LINE signal). If the turntable does not have a built-in preamp, it can be connected to an AUX or LINE input only via an external preamp. Can I connect my turntable directly to speakers?

How do I connect a phono preamp to a turntable?

Start by plugging your turntables audio cable into the phono preamps input. Be sure to connect your turntables ground wire (if it has one) to the grounding post on the phono preamp. Now plug the phono preamps audio output into one of your receivers analog audio inputs, connect the preamp to its power supply, and youre all set.

How do I connect a turntable to a mini hi-fi system?

To connect a turntable without a built-in preamp to a mini Hi-Fi system, you will need to use a standalone preamp between the turntable and the mini Hi-Fi system. You connect the RCA cable from the turntable to the input on the preamp. And the output on the preamp to the LINE input on the mini Hi-Fi system.

How do I connect my turntable to speakers?

In total, there are 6 different combination options when it comes to connecting your turntable to speakers. 1. Turntable + Preamp + Amp + Speakers (all standalone components) 2. Turntable with a built-in Preamp + Speakers with a built-in Amplifier 3. Turntable with a built-in Preamp + Amplifier + Speakers 4. Turntable + Preamp + Powered Speakers 5.

How to set up passive speakers with a turntable?

How to Set Up Passive Speakers With a Turntable 1 Connect the turntable with the RCA cables to the preamp. (Some turntables require grounding.) 2 Connect the pre-amp to the amp with RCA cables. 3 Connect the amp to the speakers. 4 Drop the needle and enjoy! More ...

Do you need an amplifier for a turntable?

But, you don’t need to plug active speakers into an amplifier. Because active speakers have an amplifier built into them. For a turntable without an inbuilt preamp, when it’s all connected it should look like this: An RCA cable should go from the preamp to an amp/receiver (if you’re connecting passive speakers).

Can you connect turntables to speakers without a preamp?

If it doesn’t have an internal/inbuilt preamp you’ll need to first connect your turntables to an external preamp before connecting it to your speakers. You’ll also need to use speakers that have their own power. For example, speakers that you can either plug directly into a power outlet or charge them up.

How do I connect my turntable to my Mini-system?

Several options are open to you for connecting your turntable to your mini-system! But above all, you must ensure that the connections are possible. There is little chance that your mini-system has a phono input. But it must at least have an AUX IN input with RCA or Stereo Mini-Jack format.

How do I connect my turntable without a preamp?

To connect a turntable without a built-in preamp to powered speakers, you will need to use a standalone preamp between the turntable and the speakers. You connect the RCA cable from the turntable to the input on the preamp.

How do I connect my turntable to my AV receiver?

If your receiver has a PHONO input, you can simply connect your turntable to that input. Note: If your turntable has a built-in preamp, it should be turned OFF when connecting to PHONO input 2. My AV receiver does not have a PHONO input. Many current receivers do not have a built-in PHONO input.

Can I connect a turntable to surround sound?

A turntable outputs a stereo music signal and does not support surround sound. You can, however, connect a turntable to surround system and enjoy 2-channel stereo sound. To do that, the surround system must have an analog LINe input and you must use a turntable with a built-in preamp or a preamp without a built-in preamp and a standalone preamp.

Related posts: